Analog inputs, 11 analog inputs – HEIDENHAIN TNC 306 Technical Manual User Manual
Page 220
Advertising
4-120
TNC 406/TNC 306
11 Analog inputs
2/97
11 Analog inputs
The analog input of the LE360 and LE406 is connected to the gap signal to effect gap control. The
gap signal is a voltage in the range of 0 to +5 V and should never exceed this.
A detailed description can be found in the chapter "Gap Control" and the chapter "Mounting and
Electrical Installation."
Advertising
This manual is related to the following products: