HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 152)

Programming: Tools
5.2 Tool data
5
152
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
Abbr. Inputs Dialog
TYPE
Tool type: Press the ENT key to edit the field; the GOTO
key opens a window in which you can select the tool
type. You can assign tool types to specify the display
filter settings such that only the selected type is visible in
the table
Tool type?
DOC Comment on tool (up to 32 characters) Tool comment?
PLC Information on this tool that is to be sent to the PLC PLC status?
LCUTS
Tooth length of the tool
Tooth length in the tool axis?
TP_NO
Reference to the number of the touch probe in the touch-
probe table
Number of the touch probe
T_ANGLE
Point angle of the tool.
Point angle?
LAST_USE
Date and time that the tool was last inserted via
TOOL
CALL
format specified internally: Date = yyyy.mm.dd, time =
hh.mm
LAST_USE