HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 160)

Programming: Tools
5.2 Tool data
5
160
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
Example: Tool call
Call tool number 5 in the tool axis Z with a spindle speed of 2500
rpm and a feed rate of 350 mm/min. The tool length is to be
programmed with an oversize of 0.2 mm, the tool radius 2 with
an oversize of 0.05 mm, and the tool radius with an undersize of 1
mm.
20 TOOL CALL 5.2 Z S2500 F350 DL+0.2 DR-1 DR2+0.05
The character
D preceding L, R and R2 designates delta values.
Preselection of tools
The preselection of tools can vary depending on
the individual machine tool. Refer to your machine
manual.
If you are working with tool tables, use
TOOL DEF to preselect
the next tool. Simply enter the tool number or a corresponding Q
parameter, or type the tool name in quotation marks.