2 available cycle groups, Overview of fixed cycles, Available cycle groups – HEIDENHAIN TNC 128 (77184x-02) User Manual
Page 373: Available cycle groups 15.2
Available Cycle Groups 15.2
15
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
373
15.2
Available Cycle Groups
Overview of fixed cycles
The soft-key row shows the available groups of
cycles
Cycle group
Soft key
Page
Cycles for pecking, reaming, boring, tapping and counterboring
Cycles for milling rectangular pockets and rectangular studs
Cycles for producing point patterns
Coordinate transformation cycles which enable datum shift, rotation, mirror image,
enlarging and reducing for various contours
Special cycles such as dwell time, program call, oriented spindle stop
Cycles for automatic tool measurement (enabled by the machine tool builder)
If required, switch to machine-specific fixed
cycles. These fixed cycles can be integrated by
your machine tool builder.