HEIDENHAIN TNC 310 (286 140) - Manual (Page 187)

175 HEIDENHAIN TNC 310
Programming example
Calculate an angle with arc tangent as opposite side (Q12) and
adjacent side (Q13); then store in Q25.
To select Q parameter functions:
Press the PARAMETER FUNCTIONS soft key.
<
To select formula entry: Press the Q key and the
FORMULA soft key.
Parameter number for result?
25 Enter the parameter number.
Shift the soft-key row and select the
arc tangent function.
Shift the soft-key row and open parentheses.
Enter Q parameter number 12.
Select division.
Enter Q parameter number 13.
Close parentheses and conclude
formula entry.
Example NC block
37 Q25 = ATAN (Q12/Q13)
1
0.8 Ent
er
ing F
o
rmulas Dir
ectly