HEIDENHAIN TNC 310 (286 140) - Manual (Page 27)

15 HEIDENHAIN TNC 310
2
.2
M
o
v
in
g
t
h
e
M
a
c
hine
A
x
e
s
2.2 Moving the Machine Axes
Traversing the machine axes with the axis direction keys
is a machine-dependent function. Refer to your machine
tool manual.
Traverse the axis with the axis direction keys
Select the Manual Operation mode.
<
Press the axis direction button and hold it as
long as you wish the axis to move.
...or move the axis continuously:
and Press and hold the axis direction button, then
press the NC START button: The axis continues
to move after you release the keys.
Press the NC STOP key to stop the axis.
You can move several axes at a time with these two methods.