8 a d ditional f unctions – HEIDENHAIN TNC 320 (340 55x-05) User Manual
Page 248

248
Programming: Q Parameters
8.8 A
d
ditional F
unctions
In the part program, program FN 16: F-PRINT to activate the
output:
The TNC then outputs the file PROT1.A through the serial interface:
MEASURING LOG OF IMPELLER CENTER OF GRAVITY
DATE: 27-11-2001
TIME: 8:56:34
NO. OF MEASURED VALUES : = 1
X1 = 149.360
Y1 = 25.509
Z1 = 37.000
HOUR
Number of hours from the real-time clock
MIN
Number of minutes from the real-time clock
SEC
Number of seconds from the real-time clock
DAY
Day from the real-time clock
MONTH
Month as a number from the real-time clock
STR_MONTH
Month as a string abbreviation from the real-
time clock
YEAR2
Two-digit year from the real-time clock
YEAR4
Four-digit year from the real-time clock
96 FN 16: F-PRINT TNC:\MASKE\MASKE1.A/RS232:\PROT1.A
Keyword
Function