3 pr ogr amming the first p a rt – HEIDENHAIN TNC 320 (340 55x-05) User Manual

Page 43

Advertising
background image

HEIDENHAIN TNC 320

43

1

.3 Pr

ogr

amming the First P

a

rt

U

Move the tool to workpiece depth: Press the orange

axis key and enter the value for the position to be
approached, e.g. –5. Confirm with the ENT key

U

Confirm Radius comp.: RL/RR/no comp? by pressing

the ENT key: Do not activate the radius compensation

U

Feed rate F=?

Enter the positioning feed rate, e.g.

3000 mm/min and confirm with the ENT key

U

Miscellaneous function M?

Switch on the spindle and

coolant, e.g. M13. Confirm with the END key: The TNC
saves the entered positioning block

Advertising
See also other documents in the category HEIDENHAIN Equipment: