Figure 42 – HEIDENHAIN PROFINET User Manual
Page 95
Advertising
Firmware upgrade
95
During upgrade a progress page is displayed. Depending upon the
choice of web browser, the auto generated progress page will
take some time to be displayed. However, the progress web page
should always be displayed when the upgrade is finished. If no er-
rors occur during upgrade the encoder will automatically reboot it-
self and connect to the PROFINET IO-controller with the new
During the upgrade, both the bus status LED and the device sta-
tus LED will be flashing green. If an error occurs both LEDS will
If the upgrade fails check the error code displayed on the progress
page. The error codes are described in chapter 8.3.
Advertising