SMA BLUETOOTH REPEATER OUTDOOR - Manual (Page 12)

4 Product Description SMA Solar Technology AG
12 BTREPOUT-IA-en-11 Installation Manual
4.3 Device Overview
Figure 4: Overview of the enclosure elements (with enclosure lid (left-hand) and enclosure bottom (right-hand))
Item Description
A Seal
B Enclosure lid screw
C Top-hat rail power supply unit*
* only included in order option top-hat rail power supply unit
D Feed-through terminal for the connection to the voltage supply
E Enclosure opening for voltage supply
F Opening with self-adhesive membrane for pressure equalisation
G Screw seal with screwable seal insert, by means of which there is access to the
rotary switches MODE and NetID
H Bluetooth Repeater
Do not damage or remove the self-adhesive membrane
The self-adhesive membrane is a pressure membrane balance element, e. g. for heat
generation in the inside of the enclosure, and ensures the tightness of the enclosure in
accordance with the degree of protection IP54* .
* according to IEC 60529