SMA BLUETOOTH REPEATER OUTDOOR - Manual (Page 8)

2 Safety SMA Solar Technology AG
8 BTREPOUT-IA-en-11 Installation Manual
2.2 Qualification of Skilled Persons
The work described in this document must be performed by skilled persons only. Skilled persons must
have the following qualifications:
• Training in the installation and commissioning of electrical devices and plants
• Knowledge of how to deal with the dangers and risks associated with the installation and
operation of electrical devices and plants
• Knowledge of all applicable standards and directives
• Knowledge of how an inverter works and is operated
• Knowledge of and adherence to this document and all safety precautions
2.3 Safety Precautions
Electric Shock
Lethal voltages are present in the conductive parts of the inverter.
• Prior to performing any work on the inverter, disconnect the inverter from any voltage sources
on the AC and DC sides (see inverter installation manual). Observe the waiting time to allow
the capacitors to discharge.
Burn Hazards
Some parts of the inverter enclosure can get hot during operation.
• During operation, touch the inverter on the enclosure lid only.
Environmental Influences
When closed, the Bluetooth Repeater Outdoor has the degree of protection IP54.
The Bluetooth Repeater Outdoor is thus protected against dust intrusion and water penetration. Dust
intrusion and water penetration can damage the Bluetooth Repeater Outdoor.
• When the enclosure of the Bluetooth Repeater Outdoor is not closed, protect the
Bluetooth Repeater Outdoor against dust intrusion and water penetration.
• Close the enclosure of the Bluetooth Repeater Outdoor again after performing any work on the
Bluetooth Repeater Outdoor.
Electrostatic Discharge
By touching electronic components, you can damage or even destroy the inverter or the
Bluetooth Repeater Outdoor through electrostatic discharge (ESD).
• Earth yourself before touching any components of the inverter or the Bluetooth Repeater
Outdoor.