SMA SB 4200TL HC Multi-String - Manual (Page 43)

SMA Technologie AG Technical Data
Installation Guide SBTLHCMS-IEN080411 Page43
8.4. 3 Country-specific Parameter Settings
The parameters listed below represent country-specific settings and are only displayed
in installer mode. All other parameters are international and can be viewed in the table
in section 8.4. 2.
8.4. 4 Non-modifiable Parameters
The following parameters are displayed in the parameter list but cannot be changed:
Name Short
descr. Country settings
Germany Italy Great Britain
Default GER/VDE0126-1-1 IT GB
dFac-Max Hz/s 4.0 0.20 0.25
dZac-Max mOhm 600 350 350
Fac-delta- Hz 2.45 0.29 0.5
Fac-delta+ Hz 0.19 0.29 0.5
Ni-Test 1 0 0
T-Start s 2 2 180
Uac-Min V 198 198 209
Uac-Max V 260 260 261
Name Short
descr.
Factory setting
SB 4200TL HC SB 5000TL HC
Fac-Tavg ms 160 160
Firmware-DC-BFR
Hardware-DC-
BFR
Plimit W 4200 5100
SMA-SN
Software-BFR
Software-SRR
Uac-Tavg ms 80 80