Yaskawa Σ-mini Series - Manual (Page 15)

5.1 Typical Configuration
E - 11
Molded-case circuit
breaker (MCCB)
Used to protect
power supply line.
Shuts the circuit
OFF when
overcurrent is
detected.
Noise filter
Used to eliminate external
noise from power supply line.
Power supply:
Single-phase
200 or 100 VAC
Molded-case
circuit breaker
Noise
filter
Magnetic contactor
Turns the Servo
ON or OFF.
Use a surge
suppressor for
the magnetic
contactor.
Model:
HI-Series
Magnetic
contactor
AC/DC power supply
Supplies Servopack
with 24 VDC.
AC/DC
power
supply
Power supply
ground line
Host controller The SGDF Servopack can be
used with most host controllers.
MEMOCON GL120/GL130 PLC
with Motion Control Module
Digital Operator
Allows the user to
set user constants
or operation
references and
display operation
status or alarm
status. Personal
computers can also
be used.
Personal computer
Connecting cable: JZSP-CFS01 to 03
Encoder cable
Motor cable
JUSP-OP02A-3