Yaskawa MP940-MW+ User Manual
Page 23
Advertising
TECHNICAL NOTE
MOTION PRODUCT AND ENGINEERING GROUP
Yaskawa Electric America - 2121 Norman Drive South – Waukegan IL 60085
(800) YASKAWA - Fax (847) 887-7280
5/22/2003
23 of 34
eng/PubNumber/MCD
SGDH Display). The battery test can be left at disabled if system does not include a battery
backup. However, user should be concerned about data and program maintainability during
extended power off time. The use of Flash memory is out of the scope of this document.
COM1
Com1 parameters were left at factory default. Leaving them in this configuration allows
for correct connection to MotionWorks+ software.
Advertising