Yaskawa VS-616G5 Profibus-DP Control Card SI-P - Manual (Page 3)

VS-616G5 Option Instruction Manual: Profibus-DP Control Card SI-P Page 3
INTRODUCTION
The Profibus-DP Control Card SI-P is used to connect the VS-616G5 inverter to a Profibus-DP network.
The option card supports 32 bytes of input data, 32 bytes of output data, data transmission rates of up to
12 Mbps, and uses a RS-485 electrical interface.
Description of the Profibus-DP Option Card (SI-P) for the VS-616G5
Name YEA Code Number Functions
Profibus-DP
Option Card
SI-P
YAG5-PDP
• Connects inverter to and communicates with a Profibus-DP communication network .
• Option card plugs into 2CN connector on the control board.
• Option card supports 32 bytes of input data and 32 bytes of output data.
• The card requires VS-616G5 Flash # VSG101042 or higher.
Fig. 1 Profibus-DP Control Card SI-P
Terminal Block TC1
Termination Switch
Address Switch 1 (
×
10)
Address Switch 2 (
×
1)
Indication LED’s
60-pin Connector to
inverter control board (2CN)
Stand-off mounting
hole (4.0mm) dia.
Stand-off mounting
hole (4.0mm) dia.
Grounding lead wire
(connect to terminal #12
of inverter control board)
CODE NO. 73600-C0220
SI-P
YAG5-PDP-T20095