Tool requirements, 3 receiving – Yaskawa V1000 Option 24 V Power Supply User Manual
Page 10
Advertising
3 Receiving
10
YASKAWA ELECTRIC TOBP C730600 27B V1000 Option PS-V10 Installation Manual
◆
Tool Requirements
Screwdriver (flat-tip): A straight-edge screwdriver with a blade width of 2.5 mm (3/32 in.)
and a blade thickness of 0.6 mm (1/64 in.) is required to install the 24 V Power Supply
Option.
Figure 2
Figure 2 Required Screwdriver Dimensions
Blade width
2.5 mm max.
0.6 mm max.
Blade thickness
Advertising