Yaskawa GPD505/P5 - Manual (Page 19)

15
TM.IW.01
3-1 Uploading and Downloading Parameters
Before inverter parameters can be uploaded or downloaded, the inverter product type must
be selected, and the inverter must be connected, or brought online, with the InverterWin

software. See Chapter 2 for more information on Operation Online.
Inverter parameters may be uploaded from the inverter or downloaded to the inverter. Once
parameters are uploaded to the PC, they may be saved, printed, or downloaded at any time.
!
! ! ! Uploading Parameters to the PC
When the inverter is brought online, the initial parameter values will be uploaded to the PC.
To upload new parameters to the PC, first determine if only a single parameter should be
read or if all parameters are needed. Click on or Parameters > Read All for all
parameters. Click on or Parameters > Read for individual parameters,
If single read is or individual parameter is selected, only the highlighted parameter will be
read. Otherwise, all parameters will be read and updated. If all parameters are read, then
the progress screen will be displayed. If single read is selected, the progress screen will not
appear.
!
! ! ! Downloading Parameters to the Inverter
To download parameters to the Inverter, first determine if only a single parameter should be
sent or if all parameters are needed. Click on or Parameters > Send for individual
parameters, or click on Parameters > Send All for all parameters.
If single send is selected, only the highlighted parameter will be sent to the inverter and
updated in that inverter. Otherwise, all parameters will be sent to the inverter and updated.