Yaskawa GPD505/P5 - Manual (Page 8)

4
TM.IW.01
1-3 New Features for InverterWin
    3.00
The following are new features and changes from InverterWin

2.12 to InverterWin

3.00
1. The number of function selection tabs has been reduced from 4 to 3
2. The Graphing, Monitoring, and Fault History function development has been completed.
3. The inverter status function has been eliminated. The inverter status bits have been added
to the monitoring function.
4. The inverter alarm demo function has been changed to a Fault History function and has
been simplified.
5. The inverter monitor function selections have been expanded for P5 and selections not
available for P5 have been eliminated.
6. The P5 575V product line support has been added
7. The inverter parameter file extensions have been changed as follows:
Inverter Type
InverterWin 2.12 InverterWin 3.00 Comment
GPD505/P5 *.P5 *.P5 No Change
GPD506/P5 *.P5 *.P5P File Contents are
identical
GPD506/P5 600V N/A *.P5H New for 575V
The .P5 for GPD506/P5 was changed to .P5P so that the user could tell the files apart. The
GPD506/P5 600V was done in the same manner.