iSys i24 Direct Imaging Printer - Manual (Page 5)

i24 USERS GUIDE - 3.31.2005 4
2 PRINTER
ENVIRONMENT
Properly locating the i24 will help to enhance its performance and extend its useful life. The plotter has
a wide operating range and functions well under various conditions. For best performance, we
recommend the following conditions:
Place in a well ventilated, stable environment free from abrupt temperature or humidity changes.
Temperature – 10 to 40 deg. Celsius (50 to 104 deg. F)
Relative Humidity 40% and 70% (non-condensing)
Place on a firm, flat surface.
Avoid sources of direct heat and sunlight.
Allow a minimum of 20 cm (9 in.) side clearance for proper airflow.
CAUTION:
Do not touch the thermal print head. Natural body oils can damage it. Scratches in the
print head will affect image quality. Print head damage caused by users is not covered
by warranty. Do not block the air vents. Proper airflow helps maintain operating
temperature.