KACO Powador-proLOG - Manual (Page 31)

Page 32 Operating Instructions Powador-proLOG_EN
8.2 Online values
This section shows various measured values from the sensors
and counters that are connected to the analogue and digital
inputs. If inverters are connected to the RS485 interface, you
can also query the inverter values.
8.2.1 Analogue/digital
S e c t i o n 8 · M e n u D e s c r i p t i o n
Details of the digital inputs:
Example:
The system consists of two sub-systems, which have separate
counters connected to the Powador-proLOG. To get the proper
totals, activate the two sub-counters for consideration under
“ Admin measurement -> Energy of digital channels”) An overview of the system’s overall energy production is pro-
vided here. You can defi ne how this overall total is calculated
in the > Admin measurement -> Energy of digital channels”)
section.
This section lists the measured values for each digital input.
Current power:
The pulse constant is used to convert counter pulses to the
corresponding power over a specifi ed period of time. (Power
displayed in kW.)
Minimum:
The lowest measured value for the current day
Details of the analogue inputs:
Maximum:
The highest measured value for the current day
Counter reading:
This column shows the overall total for the measured pulses.
You can calibrate this display with the actual value on the
energy counter. (See the “Admin measurement -> Digital
channels”) menu item; displayed in kWh).
Analogue values are shown with channel number and desig-
nation. The following information is provided:
Value:
Current online value (updated every 10 seconds)
Minimum:
The lowest measured value for the current day
Maximum:
The highest measured value for the current day