Curtis RLC4283A User Manual
Page 10
8
Chapter 1 Introducing the TV
Setting Up Your TV
Follow the instructions below to install the TV stand:
Open the box, and make sure all necessary parts are in the box. The package contains:
How to install the TV Stand
Place the TV face down on a protective
surface.Insert the neck (1) onto the bottom
stand (2). Attach the further plastic ring (3) and
the round metal plate (4) and secure all parts
together by inserting the screws (5) and
tightening them with the screwdriver provided.
Finally, use a screw driver to tighten the screws on the bottom of the stand until they are
firmly fixed in place.
Do not force the TV over its maximum viewing angle settings as stated above.
Attempting this will result in damage to the TV and stand.
TV
Stand
(1)
(4)
(5)
(3)
(2)