Troubleshooting – Curtis RLC4283A User Manual
Page 37
ENGLISHENGLISHENGLISH
35
Specifications
Before consulting service personnel, check the following chart for a possible
cause of the trouble and for a possible solution.
Poor picture, sound OK
Check the interface cable between TV and antenna/cable TV.
Try another channel, the station may have broadcast difficulties.
Adjust the Brightness/Contrast options in the
PICTURE
Menu.
Audio noise
Move any infrared equipment away from the TV.
TV will not turn on
Make sure the power cord is plugged in, then press the
POWER button on the remote.
The batteries in the remote control may have lost their charge.
Replace the batteries.
No picture, no sound
Check the interface cable between TV and antenna/cable TV.
Press the
POWER button on the remote.
Press the
INPUT
button on the remote, then press
▲▼ button to select the
connected video sources and press OK.
Picture OK, poor sound
Sound may be muted. Press the MUTE button on the remote.
Press the
VOL+
button to increase the volume.
TROUBLESHOOTING