Curtis RLC4283A - Manual (Page 19)

ENGLISH
17
Chapter 2 Installing the TV

Use a coaxial cable to connect the TV signal to the TV’s TV CABLE terminal.

Connect the power cord to the wall outlet before turning on the power switch of the TV.
.

Press the POWER button on the remote to turn on the TV.
Always disconnect the TV from the main voltage when the TV will not be used for
a long period of time. The POWER button on the front panel is only used for
switching the TV into standby, it does not disconnect the device from the main
voltage. To completely disconnect the main voltage, please remove the power
plug from the socket.

Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to
select TV, and press the OK button.