Curtis RLC4283A - Manual (Page 27)

ENGLISH
25
Chapter 3 Using the TV
Screen settings Press the OK button to enter the Screen Setting menu.
SCREEN SETTINGS
Screen Size Normal
Auto Wide
:Select Menu :Change Setting :Return MENU
ADVANCED PICTURE SETTINGS
Off
Off
Dynamic Contrast
Film Mode
Noise Reduction Off
MPEG Noise Reduction Off
:Select Menu :Go to next menu
/
:Return MENU OK
 Screen size :
Cycles among screen size types: Normal/WaterGlass/Cinema/Full
 AutoWide :
Press the OK button to automatically adjust the display settings to
optimize performance based on the source mode.
PC Settings In PC mode, press the OK button to enter the PC Setting menu.
 Auto Adjust :
Press the ◄► button to select Exceute, the function automatically
adjust the display settings to optimize performance.
 Horizontal Position:
Adjusts the position of the picture left and right in the window.
 Vertical Position :
Adjusts the position of the picture up and down in the window.
 Clock :
Controls the width of the picture.
 Phase :
Controls the signal phase, which can improve focus clarity and image
stability.
 Reset :
Press OK button to restore factory settings.
Color Temperature Adjusts color components independently to achieve a warm or cool
effict: Cool/Normal/Warm
Advanced Picture Settings
Press the OK button to enter the Advanced Picture Setting menu.
 Dynamic Contrast:
Enables or disables the Dynamic Contrast function.
 Film Mode :
Enables or disables the Film Mode function.
 Noise Reduction :
Select to reduce the noise level of connected equipment: Auto/off/low/
middle/hight
 MPEG Noise Reduction :
Enables or disables the MPEG NR function.