Casio XJ-H2600 User Guide - Manual (Page 43)

43
Input Settings Main Menu
Restore Menu
Defaults R C V H D U N Source
Specific
Use this sub-menu to return all of the sub-menu items on the Screen
Settings main menu to their initial default settings.
z Restoring menu defaults when there is no input signal will restore
defaults for the currently selected input source.
z Note that the “Keystone Correction”, “Projection Mode”, “Ceiling
Mount”, “Startup Screen”, “No Signal Screen”, and “Blank
Screen” settings are always returned to their initial defaults,
regardless of the currently selected input source.
Setting Name Input Setting Unit Description
COMPUTER1
Terminal/
COMPUTER2
Terminal R C N Single Use this sub-menu to specify manually the type of signal being input
from the projector’s COMPUTER IN 1/COMPUTER IN 2 terminal.
Auto *:
Automatically detects the signal being input from the COMPUTER
IN 1/COMPUTER IN 2 terminal and configures the appropriate
input protocol.
RGB:
Select this option when a computer is connected to the
COMPUTER IN 1/COMPUTER IN 2 terminal. For details about
connecting a computer, see “Connecting the Analog RGB Output
of a Computer to the Projector” (page 12).
Component:
Select this setting when the projector’s COMPUTER IN 1/
COMPUTER IN 2 terminal is connected to the component video
output terminal of a video device using a commercially available
component video cable. For information about connection, see
“Connecting to a Video Device” (page 14).
Note
The setting of this item cannot be changed while the projector
is in the 3D input mode (“3D Input Mode”, page 17) or “On” is
selected for the “Option Settings 2 J Interactive Pointer”
setting.
Video Signal/
S-Video Signal V N Single Use this sub-menu to specify manually the type of signal being input
from the projector’s VIDEO terminal or S-VIDEO terminal.
Auto *:
Select this setting to have the projector switch the video signal
system automatically in accordance with the input signal from the
video device that is connected to the VIDEO terminal or S-VIDEO
terminal.
NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 / SECAM:
Each setting selects the applicable video system. Use these
settings when you want to specify only one specific video signal
for the VIDEO terminal or S-VIDEO terminal.
Setting Name Input Setting Unit Description