Casio XJ-H2600 User Guide - Manual (Page 49)

49
Operational Info Main Menu
Restore All Defaults Main Menu
Setting Name Input Setting Unit Description
Input Signal R C V H D U N Source
Specific
This sub-menu item shows the currently selected input signal (RGB,
Component, Video, S-video, HDMI (PC), or HDMI (DTV)). “- - - -” is
indicated here when there is no input signal.
Signal Name R C V H D U Source
Specific This sub-menu item shows the signal name of the signal being input
to the projector. For details about signal names, see “Signal Name”
under “Supported Signals” (page 62).
Resolution R H Source
Specific This sub-menu item appears only when RGB is the input signal. It
shows the number of vertical and horizontal pixels of resolution of
the RGB or HDMI (PC) input signal.
Horizontal
Frequency R C V H D Source
Specific This sub-menu item shows the horizontal frequency of the input
signal.
Vertical
Frequency R C V H D Source
Specific This sub-menu item shows the vertical frequency of the input signal.
Scan System R C H D Source
Specific This sub-menu item appears only when RGB, Component,
HDMI (PC), or HDMI (DTV) is the input signal, and shows the scan
system of the input signal. The scan system is interlace or
non-interlace for an RGB or HDMI (PC) signal input, and interlace or
progressive for a component or HDMI (DTV) signal input.
Light Time R C V H D U N Single This sub-menu item shows the cumulative number of hours the
current light source unit has been used to date.
Setting Name Input Setting Unit Description
Unit Operating
Time R C V H D U N Single This sub-menu item shows the cumulative operating time of this unit.
This time cannot be initialized.
Restore All
Defaults R C V H D U N Single This sub-menu returns all sub-menu items on all main menus to their
initial default settings. This operation can be performed regardless of
the currently selected input source and regardless of whether or not
a signal is currently being input. For details about this procedure, see
“To restore all settings on the setup menu to their initial factory
defaults” on page 37.