Option settings 2 main menu, Important – Casio XJ-H2600 User Guide User Manual

Page 46

Advertising
background image

46

Option Settings 2 Main Menu

Setting Name

Input

Setting Unit

Description

Pointer

R C V H D U N Single

Use this sub-menu to specify the type of pointer that appears first
when you press the [POINTER] key.

Plug and Play
(USB port
models only)

R C V H D U N Single

Use this sub-menu to turn plug-and-play on or off.

On

*:

Select this option to turn on plug-and-play. This will allow the
projector detect when an external USB device is connected and
make that device the input source automatically.

Off:

Select this option to turn off plug-and-play.

Note

z For details about plug-and-play, see the “USB Function

Guide”.

z Regardless of the setting of this item, plug-and-play is

disabled while the projector is in the 3D input mode (“3D
Input Mode”, page 17
) or “On” is selected for the “Option
Settings 2 J Interactive Pointer” setting.

Audio Out

R C V H D U N Single

Specifies whether the input audio signal should be output from the
projector’s built-in speaker or to the line output.

Speaker

*:

Outputs the audio signal being input to the projector from the
speaker.

Line:

Outputs the audio signal being input to the projector from the
AUDIO OUT terminal.

High Altitude

R C V H D U N Single

Use this sub-menu to turn the high-altitude fan speed setting on or
off in accordance with the altitude of the area where you are using
the projector.

On:

Select this setting when using the projector in a high altitude
(1,500 to 3,000 meters above sea level) area where air is thin. This
setting increases cooling efficiency.

Off

*:

Select this setting at normal altitudes (up to 1,500 meters).

Important!

Do not use this projector at altitudes greater than
3,000 meters above sea level.

Control Panel
Lock

R C V H D U N Single

Use this sub-menu to disable (lock) and enable (unlock) the
projector’s control panel.

On:

Select this setting to disable (lock) all projector key operations
except for [P] (Power).

Off

*:

Select this setting to enable (unlock) projector key operations.

Custom Logo
Capture

R C V H D U

Single

See “Custom Logo Capture” (page 30).

Advertising