Casio IT-2000D33E - Manual (Page 16)

E-17
For connection of the charger to charge the lithium ion battery pack.
Protected by a cover that must be opened for connection.
Stays lit while the lithium-ion battery pack is being charged, and goes
out after charging is complete. Lights momentarily when the charger
is connected even when the battery pack is charged.
Cuts the printed paper roll.
Remove this cover to remove paper when a paper jam occurs.
Emits audible signals to confirm certain operations. Make sure that
buzzer holes are not blocked so that signals can be heard.
Detects available light. This sensor switches the backlight on (when
dark) and off (when bright). For proper operation, make sure that this
sensor is not blocked.
Display data during program execution or debugging. Also provides
touch panel keys for input by touching the screen with a finger or the
stylus pen that comes with the Data Collector.
15 keys including 10-key pad and execute key.
Used when installing roll paper or feeding paper manually.
Press to turn power on and off, or to restore power after auto power
off operation.
Lift this lever up when installing or replacing a paper roll.
For connection of a bar code reader or other external device.
Protected by a cover that must be opened for connection.
For touch panel operations.
Communication port for data exchange between two Data Collectors
or with the I/O box.
1 Lithium ion battery
pack charger connector
2 Charge indicator
3 Paper cutter
4 Printer cover
5 Buzzer
6 Light sensor
7 LCD/Touch panel
8 Key pad
9 Feeding dial
10 Power switch
11 Head-up lever
12 RS-232C interface
connector
13 Stylus pen
14 Infrared interface
General Guide
Left Front Right
0
1
2
1 2 3
4 5 6
7 Fn 8 9
CLR
6
5
10
9
14
13
8
7
3
4
12
11