Casio IT-2000D33E - Manual (Page 17)

E-18
Top Back
Bottom
Locks optional PC card in place.
Make sure that this button is in the LOCK position when using a PC
card.
Press this button (after opening the PC card slot cover and setting the
PC card lock button to FREE) to eject a PC card installed in the Data
Collector.
Insert the optional PC card here when installing.
Open when inserting a PC card.
For connection of the neck strap.
These terminals mate with the I/O box to receive electrical power for
charging the lithium-ion battery pack.
Houses the lithium-ion battery used for memory backup.
Slide to open the battery pack cover.
Houses the lithium-ion battery pack that is the Data Collector’s main
power supply.
Use a paper clip or other thin, pointed object to press this button to
launch the Data Collector’s system initialization routine.
For connection of future expansion options.
15 PC card lock button
(inside PC card slot
cover)
16 PC card eject button
(inside PC card slot
cover)
17 PC card slot cover
18 Neck strap bars
19 Charger terminals
20 Backup battery
compartment
21 Open button
22 Lithium-ion battery
pack compartment
connector
23 Initialize button
24 14-pin serial interface
connector
Note! Pressing the Initialize button clears all data and programs from memory.
Never press the Initialize switch unless absolutely necessary.
17
24
21
20
23
18
22
15 16
19
General Guide