Casio IT-2000D33E - Manual (Page 50)

E-51
Important! • The PC card is not detected by the Data Collector when the PC card
lock button is in the LOCK release position. Sliding the PC card lock
button to the LOCK release position while the Data Collector is turned
on causes power to turn off automatically. Interrupted operations can
result in system malfunction when the Data Collector is turned back
on.
• Improper installation of a PC card can result in system malfunction and
inability to read the card.
To remove a card from the Data Collector
1
Turn off the Data Collector, turn it over, and
lift up the PC card slot cover while pressing
the projection.
2
Slide the PC card lock button in the direction
of the arrow to release LOCK and then press
the PC card eject button to eject the PC card.
Remove the PC card from the Data Collector.
Important! Forcing the PC card eject button without first sliding the PC card lock
button to the LOCK release position can damage the internal mechanism
of the Data Collector. Make sure you carefully follow the steps of the
procedures described above whenever inserting or removing a PC card.
PC card eject
button