Casio IT-2000D33E - Manual (Page 40)

E-41
Using the Optical Communication Unit to Charge the Data
Collector Battery Pack
1
Turn on the Optical Communication Unit, and
its power indicator should light up red.
2
Mount the Data Collector onto the Optical
Communication Unit making sure that their
charger connectors join securely with each
other.
If the Data Collector is turned off, it will turn
on automatically once a power connection is
established (this feature can be disabled by
software).
The power indicator of the Optical
Communication Unit should change to green
at this time, and the charge indicator should
light up red to indicate that the battery pack is
being charged.
Important! • Use the charger units designed for this product to charge the specified
battery packs only. Never try to charge another type of battery pack.
• The battery pack discharges even when it is not loaded in the Data
Collector. Make sure you load the battery pack into the Data Collector
as soon as possible after it is charged.
• Recharge the battery pack at a temperature between 0
°
C (32
°
F) and
40
°
C (104
°
F). Charging outside this range can cause leaking of battery
fluid and generation of heat by the battery. It can also reduce battery
performance and shorten battery life.
• To ensure proper battery pack charging, periodically wipe off the
charge connectors of the Optical Communication Unit and Data
Collector with a cotton swab or soft, dry cloth.
Infrared
interfaces
Power
switch (on)
System status indicator
Communication status indicator
Charge indicator
Power indicator
CAUTION! For IrDA transmission function, high sensitivity element is used in this
unit.
Avoid the proximity of a unit or equipment such as a cellular phone
emitting electrical current during data communication.
To get a smooth transfer using this unit, keep some distance from the
equipment (at least 30 centimeters from a cellular phone).