Casio IT-2000D33E - Manual (Page 49)

E-50
Your Data Collector supports use of a variety of PC cards (FROM), which are available as
options. FROM cards are available in different capacities, so you can select the one that
best suits your needs.
To load a memory card into the Data Collector
1
Turn off the Data Collector, turn it over, and
lift up the PC card slot cover while pressing
the projection as shown in the illustration.
2
Slide the PC card lock
button in the direction of
the arrow to release
LOCK and then slide the
end of the PC card
marked with
into the
Data Collector. The
arrow should be facing
up (so you can see it).
3
Slide the PC card lock button to the LOCK
position.
Using PC Cards
Lock
button
Make sure the mark is
facing up (so you can see
it). The location of the
mark differs according to
the card you are using.