Specifi cations – Casio STC-U10 User Manual
Page 48
47
Symptom
Cause and Required Action
● Stamped images are
not clear.
• Stamping certain types of paper may result in unclear
images.
➜ Refer to “Supported paper types” (page 12).
● A sheet holder is
jammed and won’t
come out.
Referring to “If a sheet holder becomes jammed” (page
31), pull out the sheet holder.
Next, return the release lever to the PRINT side and
perform printing again. If you experience problems using
the same sheet holder, use a new one.
Important!
Note the following while printing is in progress.
• Do not allow the sheet holder outlet slot to become
covered.
• Do not touch the sheet holder.
• Do not change the release lever position.
• Do not disconnect or unplug the AC adaptor.
Specifi cations
Model: STC-U10
Printing
Printing method:
Fusion melting by thermal head
• Stamp type: Permeation-type stamp
Printing resolution:
200 dpi
Maximum printing width: Approximately 45 mm (1
3
/
4
")
Maximum printing length: Approximately 90 mm (3
1
/
2
")
Supported types:
15 mm × 15 mm (
3
/
5
" ×
3
/
5
"), 15 mm × 30mm (
3
/
5
" × 1
1
/
6
"),
15 mm × 60 mm (
3
/
5
" × 2
3
/
8
"), 30 mm × 30 mm (1
1
/
6
" × 1
1
/
6
"),
30 mm × 60 mm (1
1
/
6
" × 2
3
/
8
"), 45 mm × 45 mm (1
3
/
4
" × 1
3
/
4
"),
45 mm × 90 mm (1
3
/
4
" × 3
1
/
2
")
Power Supply, Other
Operation power supply: AC adaptor
AD-A12200L
(supplied)
Rated voltage:
12V DC
Rated consumption current: 1 A (12 W)
Dimensions: 82
mm
(W) × 123 mm (D) × 59.5 mm (H) (3
1
/
4
" Ч 4
13
/
16
" Ч 2
5
/
16
")
(Including rubber feet.)
Weight:
Approximately 305 g (10.76 oz.)
Operating temperature:
10°C to 35°C (50°F to 95°F)