Continuous shooting, Auto focus in continuous shooting – Sony ILCA-99M2 User Manual

Page 45

Advertising
background image

C:\4688165121\4688165121ILCA99M2AP2\01GB-ILCA99M2AP2\030BAS.indd
2016/09/01 10:27

ILCA-99M2
4-688-165-12(1)

GB

45

Shooting

Continuous shooting

Shoots images continuously while you press and hold down the shutter
button.

1

/  (Drive Mode) button

[Cont. Shooting].

• You can also select MENU

 (Camera Settings1)

 [Drive Mode].

2

Select the desired mode by pressing the multi-selector right/
left.

Continuous Shooting: Hi+: Images are shot continuously at the

maximum speed while you press and hold down the shutter button.
The aperture value is locked when the first shot is taken.

Continuous Shooting: Hi /

Continuous Shooting: Mid /

Continuous Shooting: Lo: Subjects are easier to track because

the subject is displayed in real-time on the monitor or viewfinder
during shooting.

Auto focus in continuous shooting

For the first shot of continuous shooting, all of the focus points are
available if the Hybrid Phase Detection AF is active, and the dedicated
phase detection AF points are available if the Hybrid Phase Detection
AF is not active. Focus points available from the second shot onward are
described in the table below.
Even if the lens supports the Hybrid Phase Detection AF, the auto focus
area is limited to the dedicated phase detection AF area for the first shot
in the following situations:

• [AF System] is set to [Ddc Phase AF Only].

• [Selectable AF Area] is set to [Only Cross-Type AF].

Advertising