Silvercrest SEKU 2000 A1 - Manual (Page 75)

74
Assembly
SEKU 2000 A1
GB
MT
Installing the appliance in the fi re surround
To fi nalise, install the appliance in the assembled fi re surround.
Place the appliance carefully on the base plate (from the rear of the fi re surround) and then push it ♦
gently forward as far as it will go into the opening of the fi re surround.
Secure the appliance to the fi re surround at the edges with the fi xing devices ♦ F and the screws
6 x 25 mm A .
Insert the plug into the mains power socket. ♦
WARNING
Improper laying of the power cable can cause damage to people and property!
Pay heed to the following safety information to avoid these risks:
Do not bend or clamp the power cable and do not lay it tautly. ►
Do not run the power cable over sharp edges. ►
A
F
Buch_66252_LB5.indb Abs3:74 08.06.2011 14:59:16 Uhr