RKI Instruments Eagle Series - Manual (Page 45)

Eagle Instruction Manual Setup Mode • 38
With Auto Fresh Air Adjust ON, the Eagle automatically sets the fresh
air reading for all channels during the start-up sequence.
With Auto Fresh Air Adjust OFF (default), you must press the AIR/▲
button to set the fresh air reading for all channels.
1. From the main menu, select the AUTO FRESH AIR ADJ. menu
option.
2. Press the AIR/▲ or SHIFT/▼ button to display the desired setting.
3. Press the POWER/ENTER button to enter the setting and return to
the main menu.
Updating the Interval Time Setting (Data Log Option)
This setting indicates how often the Eagle records readings into the
Data Logger. The minimum setting is 10 seconds; the maximum
setting is 5 minutes. The default setting is 5 minutes.
1. From the main menu, select the INTERVAL TIME menu option.
2. Press the AIR/▲ and SHIFT/▼ buttons to display the desired
setting.
3. Press the POWER/ENTER button to enter the setting and return to
the main menu.
Updating Log Data Over Write Setting (Data Log Option)
With Data Over Write ON, the Eagle writes over the oldest data with
new data when the Data Logger memory is full.
With Data Over Write OFF, the Eagle stops writing data when the
Data Logger memory is full.
S D
F
E R H I F R A O
F
T J A A U .
O
A
5
T G T G A D E
N
S
M
T I M E
I
O E R L
I N T E R A L V