RKI Instruments Eagle Series - Manual (Page 47)

Eagle Instruction Manual Setup Mode • 40
settings. The main menu displays after you enter the minutes
setting.
Updating the Zero Follow Settings
The Zero Follow setting is not intended for customer setup. The
default setting for most target gases is ON. The default setting for
carbon dioxide sensors and some configurations of non-standard toxic
gas sensors is OFF. The oxygen sensor does not include this feature.
CAUTION: Contact RKI, Instruments Inc. before changing this setting.
Updating the Confirmation Beep Setting
With Confirmation Beep ON, the Eagle beeps once every 15 minutes
to verify that it is operating.
With Confirmation Beep OFF (default), the Eagle does not sound a
confirmation beep.
1. From the main menu, select the CONFIRMATION BEEP menu
option.
2. Press the AIR/▲ or SHIFT/▼ button to display the desired setting.
3. Press the POWER/ENTER button to enter the setting and return to
the main menu.
Returning to Default Settings
Each of the parameters in Setup mode has a default setting. The Eagle
includes three different options for returning default settings: reset all
default settings, reset the default alarm point settings only, and reset
the default oxygen zero setting only.
CAUTION: If you reset all default settings, any changes made in setup
mode or normal operation, including calibration settings, will be
lost.
A E
F
M N T I I R O N
F
O P E F C
O
B