Precision Digital PD6830 - Manual (Page 34)

PD6830 Pulse Input Rate/Totalizer Instruction Manual
34
Setting the Time Base (tbase)
The meter calculates rate based on K-Factor and a time base of units per second,
minute, hour, or day.
Press the Enter/Ack button, at any time, to accept a setting or Menu button to exit
without saving changes.
tbase
SETUP
SEC
T BASE
nmin
T BASE
hour
T BASE
Day
T BASE
Setting the Total Conversion Factor (totCF)
Total Conversion Factor is used to convert to a different unit of total display. For
example, to display rate in gallons and total in liters, enter a conversion factor of
3.7854. When rate and total units are the same, the Conversion Factor should be
1.0000.
Press the Enter/Ack button, at any time, to accept a setting or Menu button to exit
without saving changes.
TOTCF
SETUP
3 .7854
TOT CF
d.dddd
TOT CF
Select Conversion
Factor Decimal Point
or
Enter
Conversion
Factor