Interior installation of the front of the unit – Epson HWDV080DV(N User Manual

Page 20

Advertising
background image

24632-0-0508

Page 20

INTERIOR INSTALLATION OF THE FRONT OF THE UNIT

1

2

3

Line up the two (2) tabs on the top of the wall mounting plate

with the holes in the back of the unit. Slide the back of the unit

onto the tabs of the wall mounting plate.

After the back of the unit is attached to the wall, bring in the

gas line as shown on page 18, or follow the installation template

indications. Following your city, local and state codes, attach the

gas line to the unit.

NOTE: The gas line runs through the wall or floor of the

house..

GAS LINE

Secure the back of the unit into place using two (2) screws.

Replace casing door.

Advertising