Before operating appliance – Epson HWDV080DV(N User Manual

Page 36

Advertising
background image

24632-0-0508

Page 36

8

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your

building.

• Immediately call your gas supplier from a neighbor’s phone.

Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

• If you smell gas, shut off control valve, open doors and

windows, and do not use any electrical device. Call our technical

department at (877) 459-1583.

9

10

After completion of gas pipe connections, all joints must be checked for gas-tightness by means of leak detector solution, soapy

water or an equivalent solution, as applicable.

CAUTION: Since some leak test solutions, including soapy water, may cause corrosion or stress cracking, all tested pipes and

joints shall be rinsed in water, unless it has been determined that the test solution is a non-corrosive type.

Any compound used on the threaded gas piping joint shall be resistant to any

action of liquefied petroleum gas.

A shut off valve (or appliance connector valve) must be installed in the gas

line upstream to permit servicing.

BEFORE OPERATING APPLIANCE

Advertising