To prepare for operation, To remove the cover, To adjust the supporting legs – RIGOL MSO/DS4000 Series User Manual
Page 45
Advertising
RIGOL
MSO4000/DS4000 Quick Guide
3
To Prepare for Operation
To Remove the Cover
Before using the oscilloscope, remove the front panel cover by grasping the
transverse grab on each side and pull them in the arrow directions as shown in the
figure below.
Figure 3 To Remove the Cover
To Adjust the Supporting Legs
Adjust the supporting legs properly to use them as stands to tilt the oscilloscope
upwards, thus to place the oscilloscope stably and to operate and observe the display
better. You can unfold or fold the supporting legs in the arrow directions as shown in
the figure below.
Figure 4 To Adjust the Supporting Legs
Advertising