RIGOL MSO/DS4000 Series - Manual (Page 52)

RIGOL
MSO4000/DS4000 Quick Guide 10
4. LAN
Through this interface, the oscilloscope can be connected to the network for
remote control. As the oscilloscope conforms to the LXI-C instrument standard, a
test system can be built quickly and accessed through webpage.
5. USB DEVICE
Through this interface, the oscilloscope can be connected to the printer or PC to
print data waveform or control the oscilloscope through PC software.
6. USB HOST
Through this interface, the oscilloscope can be connected to the printer to print
waveform data or be connected to a USB storage device to store waveform files.
GPIB interface communication can be realized by using the USB-GPIB interface
converter provided by
RIGOL.
Note that there is also a USB HOST interface at the front panel.
7. Lock Hole
Use the security lock (please buy it yourself) to lock the oscilloscope to a fixed
location.
8. AC Input/Switch
AC power input terminal. The power supply requirements of this oscilloscope are
100-127 V, 45-440 Hz and 100-240 V, 45-65 Hz; CAT II. Please connect the
oscilloscope to AC power using the power cord provided with the accessories.
Then, turn on the AC power switch to energize the oscilloscope. Press the power
key at the front panel to start the oscilloscope.