TA Triumph-Adler FAX 920 - Manual (Page 13)

13
v If the volume level is set to zero, no ringing tone
will be heard but faxes will still be automati-
cally received.
Loudspeaker
1 Press l to set the loudspeaker volume.
2 Set the volume using u.
3 Exit using l or STOP.
Key tones
1 Press MENU and 22. The display shows BEEPER
VOL.
2 Press START/COPY. Use u to select the volume of
the key tones.
3 To confirm the entry press START/COPY and then STOP
twice.
Energy save mode
Energy save mode reduces the energy consumption in standby
mode. You can select how many minutes after the last entry
before energy save mode is activated.
1 Press MENU and 335. The display shows SAVE
MODE.
2 Press START/COPY. Use u to select POWER SAVE.
3 Press START/COPY. Use u to select 5, 15, 30,
60 minutes or OFF.
4 To confirm the entry press START/COPY and then STOP
three times.
Toner save mode
The toner save mode decreases the consumption of the toner.
Printing quality may fall off.
1 Press MENU and 335. The display shows SAVE
MODE.
2 Press START/COPY. Use u to select TONER SAVE.
3 Press START/COPY. Use u to select ON or OFF.
4 To confirm the entry press START/COPY and then STOP
three times.
List of settings
You can print out a list of all functions and settings currently
available.
1 Press MENU, 666 and START/COPY.
2 A list of all settings is printed.