Transmission speed, Reception speed, Transmission report – TA Triumph-Adler FAX 920 User Manual

Page 21: Reception report

Advertising
background image

21

D If you send faxes to or poll faxes from fax databases, some

of these databases allow you to append the subaddress

directly to the telephone number. This will save you tele-

phone charges. First enter the telephone number of the

database and press R. Now enter the subaddress. If you are

not sure whether your fax polling service supports

subaddresses, contact the service provider.

Transmission speed

If the telephone connection used for transmission is poor,

transmission errors may occur at normal speed (14,400 bps). In

such cases it is best to reduce the speed. When you have success-

fully sent the fax, remember to set your fax machine back to the

standard speed.
1 Press MENU and 33: 31 TX SPEED.
2 Press START/COPY and use u to select the speed

you want.

3 Press START/COPY and then STOP twice.

Reception speed

If the telephone connection used for reception is poor, errors

may occur at normal speed (14,400 bps). In such cases it is best

to reduce the speed. When you have successfully received the

fax, remember to set your fax machine back to the standard

speed.
1 Press MENU and 332: 32 RX SPEED.
2 Press START/COPY and use u to select the speed

you want.

3 Press START/COPY and then STOP twice.

Transmission report

In the default setting, a transmission report is printed out only

in the event of a transmission error. However, you can change

this setting so that a transmission report is printed for every fax

transmitted, only in the event of an error or never.
1 Press MENU and 225: 25 TX REPORT.
2 Press START/COPY and use u to select ERROR,

ON or OFF.

3 Press START/COPY and then STOP twice.

Reception report

In the default setting, a reception report is printed out only in

the event of a transmission error. However, you can change this

setting so that a reception report is printed for every fax re-

ceived, only in the event of an error or never.
1 Press MENU and 226: 26 RX REPORT.
2 Press START/COPY and use u to select ERROR,

OFF or ON.

3 Press START/COPY and then STOP twice.

Advertising