EVGA force 132-YW-E178 - Manual (Page 21)

EVGA 11
Connecting Cables and Setting
Switches
This section takes you through all the connections and switch settings necessary on the
motherboard. This will include:
 Power Connections
 24-pin ATX power ( PWR1 )
 8-pin ATX 12V power ( PWR2 )
 Internal Headers
 Front panel
 IEEE 1394a
 USB Headers
 Audio
 Speaker
 COM
 FDD
 IDE
 Serial ATA II
 Chassis Fans
 Rear panel USB 2.0 Adapter
 Expansion slots
 CMOS jumper settings
See Figure 1 on page 5 to locate the connectors and jumpers referenced in the following
procedure.