EVGA force 132-YW-E178 - Manual (Page 40)

EVGA 30
IDE Channel and SATA Channel
Use these functions to detect and configure the individual IDE and SATA channels. Select a
channel and press Enter to display the IDE/SATA sub-menu.
Press Enter to auto-detect IDE and SATA channels in the system. Once the channel is
detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and Sector are
automatically filled in.
 None
There is no HDD installed or set.
 Auto
The system can auto-detect the hard disk when booting up.
 Manual
When you set the channel to [Manual] and change Access Mode to [CHS] , you can then
enter the number of cylinders, heads, Precomp, landing zone, and sector. You can manually
enter the values or you can press Enter to display a window that tells you the min and max
values.
IDE Auto-Detect [Press Enter]
Extended IDE Drive [None}
Access Mode Auto
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
 IDE Channel 0 Master [None]
 IDE Channel 0 Slave [None]
 SATA 1 (A0) [ None ]
 SATA 2 (A1) [None]
 SATA 3 (B0) [None]
 SATA 4 (B1) [None]
 SATA 5 (C0) [None]
 SATA 6 (C1) [ None ]
Press ENTER to display
IDE Channel sub-menu
IDE HDD Auto-Detect [Press Enter]
IDE Channel 0 Slave [Auto}
Access Mode [Auto]
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
Press ENTER to display
SATA Channel sub-menu