EVGA force 132-YW-E178 - Manual (Page 51)

EVGA 41
MAC Config
Press Enter to display the MAC Config menu.
 MACx LAN
Use these functions to set the MAC0 and/or MAC1 LANs to Auto or disable their
functions.
IEEE1394 controller
This function on the Integrated Peripherals menu allows you to enable or disable the
IEEE1394 (Firewire) interface.
HD Audio
This function on the Integrated Peripherals menu allows you to enable or disable the
integrated high definition audio.
IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard drive needs to
support block mode. Select [Enabled] to automatically detect the optimal number of block
read/writes per sector the drive can support. Select [Disabled] if your drive does not
support block mode.
Onboard FDC Controller
This function on the Integrated Peripherals menu allows you to enable or disable the onboard
Floppy Disk Controller function.
Onboard Serial Port 1
This function on the Integrated Peripherals menu allows you to select the onboard serial port
1 function. Options are [3F8/IRQ4] , 2E8/IRQ3] , [3E8/IRQ4] , [Auto] , and
[Disabled].
MAC0 LAN [Enabled]
MAC1 LAN [Disabled]