EVGA force 132-YW-E178 - Manual (Page 62)

EVGA 51
Frequency Settings
 CPU Freq, MHz
This value is set by the CPU Multiplier (value cannot be changed by the user).
 FSB Reference Clock. MHz
This value is set by the system (value cannot be changed by the user). To change the SLI-
Ready memory, FSB memory, and memory timing, go to the FSB & Memory screen.
 CPU Multiplier
This value changes the CPU Frequency value depending on the value you choose. Use the
Page Up and Page Down keys to scroll through the options. The options are from 6 X
through 60 X.
 PCIe
x
16_1, MHz
Use the Page Up and Page Down keys to scroll through the frequency options for the PCI
Express Bus, Slot 1 (the black slot closest to the CPU). Note that as you go higher in value,
PCIe Spread Spectrum(SPP) is disabled and cannot be changed from this status.
 PCIe
x
16_3, MHz
Use the Page Up and Page Down keys to scroll through the frequency options for the PCI
Express Bus, Slot 3 (the blue slot in the middle).
 PCIe
x
16_2, MHz
Use the Page Up and Page Down keys to scroll through the frequency options for the PCI
Express Bus, Slot 3 (the black slot farthest from the CPU).
 SPP< — >MCP Ref Clock, MHz
Use the Page Up and Page Down keys to scroll through the frequency options for the
reference clock between the SPP chip and the MCP chip.
HT Multiplier
 nForce SPP — — > nForce MCP
Use the Page Up and Page Down keys to scroll through the HT multiplier options and set
the link speed from the SPP chip to the MCP chip. Values are [1 x] through [5 x].
 nForce MCP < — — nForce SPP
Use the Page Up and Page Down keys to scroll through the HT multiplier options and set
the link speed from the MCP chip to the SPP chip. Values are [1 x] through [5 x] .