EVGA force 132-YW-E178 - Manual (Page 49)

EVGA 39
OnChip IDE Channel0 [Disabled]
x Primary Master PIO Auto
x
Primary Slave PIO Auto
x
Primary Master UDMA Auto
x Primary Slave UDMA Auto
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
IDE Function Setup
Press Enter to display the IDE Function Setup menu.
 OnChip IDE Channel0
Use this function to enable or
disable the onchip IDE
Channel0. When disabled, the
Primary Master/Slave functions
are changed to Auto and cannot
be changed.
 Primary Master/Slave PIO
When OnChip IDE Channel0
is set to [Enabled] , you can select a mode for the primary Master and Slave PIO. Select
from Auto , or Mode 1 through Mode 4 .
 Primary Master/Slave UDMA
When OnChip IDE Channel0 is set to [Enabled] , you can disable the primary Master
and Slave UDMA or set it to [Auto] .
 IDE DMA transfer access
Use this function to enable or disable IDE DMA transfer access.
 Serial-ATA Controller
This function allows you to enable specific SATA controllers, enable all controllers, or
disable all controllers. The options available are [SATA-0] , [SATA-0+1] , [Enable
All] , and [Disabled] .
 IDE Prefetch Mode
Use this function to enable or disable the IDE Prefetch mode .
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]