Amprobe DM-111S Current-Data-Logger - Manual (Page 16)

DMIIIS
EN - 14
Example of 3 rd page in single-
phase mode
Example of 3 rd page in “3
wires” three-phase mode
Example of 3 rd page in “4 wires”
three-phase mode
Example of sub-page
"CURRENT HARMONICS"
RECORDER CONFIG
CURRENT REC:
I1
HARM. REC:Pg (ON)
  + -
RECORDER CONFIG
CURRENT REC:
I1 I2 I3
HARM. REC: Pg (ON)
  + -
RECORDER CONFIG
CURRENT REC:
I1 I2 I3 IN
HARM. REC:Pg (ON)
  + -
ENTER 
RECORDER CONFIG
CURRENT HARMONICS
Thd DC 01 02 03 04
05 06 07 08 09 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31 32
33 34 35 36 37 38 39
40 41 42 43 44 45 46
47 48 49
  + -
Use the multifunction keys F1,
F2 to position the cursor on the
desired current harmonic and
use the multifunction keys F3 /
F4 to select / deselect (it’s
selected if marked in black).
Press ENTER to confirm.
Press ESC to leave the Menu
without modifying the existing
settings.
The instrument will record the
values of the selected harmonics
corresponding to the currents
selected in one of the two pages
of the Menu previously
illustrated.
ENTER 
From 2 nd page
of RECORDER CONFIG MENU
Use the multifunction keys F1,
F2 to position the cursor on the
desired word and use the
multifunction keys F3 / F4 to
modify the value or select /
deselect the desired parameter
(it’s selected if marked in black).
Press ENTER to confirm.
Press ESC to leave the Menu
without modifying the existing
settings.
If you want to change Current Harm. Selection place
Cursor on the corresponding “Pg” symbol then Press F3